Page 32 - Labstil ENG Katalog

E L E C T R I C A L
32 CABIN CHASIS 33
• All energy needs can be fed via a power input to be connected to the external grid outside
the cabin.
• The cabin chassis, on which the cabin will sit on ,and which
is mounted on the vehicle’s own chassis, is manufactured by
• Energy can also be provided by solar panels to be placed on the roof of the truck (1 m2
using U profile and L profile materials.
panel can produce approximately 200 W of energy), and hybrid operation can be achieved
by adding a backup battery group to the system.

• The energy fed from the panel and battery group is distributed within the cabin through
GAS LINE
an inverter. The distribution is maintained through a special shaft (panel) that is easy
CABIN
to access for repair If the devices to be used
purposes.
• Body (laboratory cabin) placed on the cabin chassis in the laboratory need
mounted on the vehicle chassis. It consists of five separate gas the installation
• Electric control panel
layers is completed with
The inverter, battery
stainless steel gas
group is placed in a
• 1st layer: Glass reinforced polyester, 1.5 - 2.5 mm
lines drawn from the
special cabinet behind
cylinder mounted in
• 2. Layer: Up to 8.0 mm, wooden plate, metal plate, or lead the cabin.
a specially protected,
plate
• The fuse group is insulated section
• 3rd layer; XPS or Polyurethane heat insulation layer up to
locadet inside the outside the cabinet
40.0 mm
cabinet. to the bench and
pressure regulators
• Layer 4: Up to 8.0 mm, wooden plate, metal plate, or lead
mounted on the
plate.
bench wall. Gas
V E N T I L A T I O N
• 5th layer: Glass reinforced polyester, 1.5 - 2.5 mm level in the tubes
• In-cabin climatization
can be monitored
is provided by an air-
from monometers
conditioning outdoor
mounted on benches.
unit placed on the
roof of the vehicle. Air
• The entrance door can be designed as manual, pneumatic or electric, which can be controlled by a remote control
PLUMBING
distribution inside the
unit and by the button in the driver’s cab. A motorized or manual metallic staircase with 2 or 4 steps that folds under cabin is maintained There are two separate
www.labstil.com.tr • covering can be PVC, Epoxy coating or ceramic if desired. • through specially pressure pumps. Tanks are isolated against excessive
the entrance door when driving is used, and the motorized staircase cannot be closed while the door is open. The floor
water tanks, one for
waste water and
manufactured shaft.
MDF material (laminated or lacquered) is used for cabinets and drawers. All cabinets and drawers are locked with a push
one for clean water. Clean water is fed to foucets by
If positive and negative pressure areas required,
lock. Worktops and sinks a r e made of acrylic material.
• If desired, a rest a r e a (bed, TV, seating unit) can be created. Monitors suitable for the devices to be used are mounted seperate spaces created within laboratory cabin, while temperature drop and rise. Whenever needed, special
flow direction is automatically controlled by fans, and
pipe line for pure water will be installed. Pipes are
on the bench walls. aspirators in those areas
mounted on the wall on a special shaft easy to access